原裝不二越液控單向閥,NACHI液控單向閥介質
More than 20% of the high pressure action.
And the usual one-way valve is basically the same, only the oil
From one direction, but using external liquid
Control the pressure to open the check valve, so that the oil reverse flow.
采用外部泄油型(B)時必須配備泄油管。
2、底板的外觀形狀根據尺寸不同，與圖中有稍許不同。
安裝尺寸遵照尺寸一覽表的記載。
x低液控壓力因逆流時入口側B的壓
力而變化，為此，請用低液控壓
力特性求得的比所需液控壓力高
20%以上的高壓動作。
2, the appearance of the bottom plate shape according to different sizes, and the figure is slightly different.
The installation dimensions are in accordance with the size list.
X minimum pressure on the inlet side of the inlet pressure
Force change, for this, please use the minimum liquid pressure
The force characteristic is higher than the required pilot pressure
和通常的單向閥基本相同，只讓油
從一個方向通過，但是利用外部液
控壓力可以打開單向閥，使油液反向流動。
外部泄油使用方法如下，逆流時背
壓存在于出口側A時，如下圖所示，
請務必使用外部泄油型。
1、標準品上不需要配備泄油管。
External drain is used as follows, countercurrent back
When the pressure is present on the outlet side A, as shown in the following figure,
原裝不二越液控單向閥,NACHI液控單向閥介質
