The working stroke of the cylinder is different from the return pressure
You can by giving three and five mouth two do not
With the pressure to achieve.
介質溫度 0 ÷ 50°C
工作壓力 見相關型號的技術參數
介質 經過濾的壓縮空氣,無需油霧潤滑。
如果使用油霧潤滑,應不間斷地使用油霧潤滑(使用 ISO VG32 潤滑油)
對 于 3 系列二位三通單穩式機控
閥,當給 1 口供壓時,其機能是常閉型
(NC);當給 3 口供壓時,其機能是常
CAMOZZI二位五通機控閥,CAMOZZI機控閥報價 企業QQ:2880626089 手機(同): 郵箱:@163.com 電 話:轉8009 ; :鄭娜
對于 3 系列二位五通閥機控閥,可以
工作壓力 = 0 ÷ 10 bar
公稱流量 = 500 Nl/min
驅動力 = 70 N(在 6 bar 工作壓力下)
通過給 3 口和 5 口提供不同的壓力實現氣
缸往復運動時的節能(即氣缸的伸出和縮
回可以工作在不同的壓力下)。
1 和 3 系列機控閥具有二位三通和二
位五通兩種機能,有三種驅動方式:柱
軸驅動、滾珠杠桿驅動和單向滾珠杠桿
驅動;復位形式均為機械彈簧復位。
This valve is normally closed (NC) type. When the three into the
When the air port, this valve is normally open (NO) type.
For two five-way manual valve, if you need one
開型(NO)。2 口始終為工作口。
結構形式 截止型(1 系列),滑閥型(3 系列)
閥位機能 二位三通,二位五通
材料 鋁閥體,黃銅提動閥芯,不銹鋼滑閥芯,丁腈橡膠密封件
接口 G1/8 - G1/4
環境溫度 0 ÷ 60°C
3 and 4 series manual valves are available in a variety of forms
Control the drive head to meet a variety of needs. because
Its flow is large, mostly used for direct control of the cylinder, also
Can be used as a pilot valve for large pneumatic valves.
For two three-way manual valves, when 1 is the inlet