全新YUEKN先導式溢流閥,油研先導式溢流閥價格好
上海乾拓貿易有限公司
企業QQ: 2880626085
直線：
直線:
手機；（）
郵箱: @163.com
：居琦
www.shqiantuo.net
地址：上海嘉定區嘉涌路99弄6號樓713
rate of the hydraulic circuit and eventually control
speed of the actuator precisely.
Valves with an integral check valve allow a controlled
松開鎖定螺絲，順時針旋轉流量調節撥盤增加，逆時針旋轉減少。
表盤從零到全流量大約4轉，閥門開度顯示在轉速指示器上。
（參見“流量與轉盤位置”的特性）。調整流量后，擰緊鎖定螺釘。
松開鎖定螺絲，順時針旋轉流量調節手柄增加，逆時針旋轉減少。
打開條件以內置轉數指示器中的數字刻度表示（請參見“Metred
流量與撥盤位置“）。
a hydraulically operated pilot piston mechanism
which controls opening area of the orifice of
the valve. With the use of these valves, shockless
operation either in acceleration or deceleration can be
當電磁閥打開（如下圖所示）時，流量在由大值設定的水平
流量調節螺釘，執行器以大速度設置運行。 順時針轉動調整螺絲導致流量降低。
type valves and maintain a constant flow rate
independent of change in system pressure (load) and
temperature (viscosity of the fluid). They control flow
contamination of the hydraulic fluids which may otherwise
調整流量后，擰緊鎖定螺釘。[F * G-02,03,06,10]
為了以2 L / min（.53 U.S.GPM）或更低的程度進行
流量調節，請務必使用線路濾波器
10μm或更細，并將其安裝在閥門入口附近。
Recommended Viscosity and Oil Temperatures
2 Viscosity ranging between 15 - 400 mm /s (77 - 1800 SSU).
Oil temperatures between -15/+70°C (5 - 158°F).
Use hydraulic fluids which satisfy the recommended
viscosity and oil temperatures given above.
全新YUEKN先導式溢流閥,油研先導式溢流閥價格好
