(節能) 容積效率:95% ;效率:90% (13.5MPa、1,800min-1 時)
3. 響應性高 14MPa 切斷至 13.5MPa 的響應時間:0.06sec。 13.5MPa
切斷至 14MPa 的響應時間:0.03sec。
從機軸端觀察,轉向?yàn)橛肄D(zhuǎn) (順時針方向)。
(350 to 18 mm2 / s).
Use at an ambient temperature of 0 to 60 ° C.
請務必在吸入管路中使用 150 網眼的過濾器和濾網。另
等規格均便于使用,且耐 久性群。
特點 1. 噪音低 14MPa、切斷時:53B (A);切斷前:
58dB (A)(在距離 1,200min-1 泵 1m 的點) 2. 效率高
請使用粘度與 ISO VG32、VG46 相當?shù)囊簤汗ぷ饔?,適宜
的粘度在 150 ~ 20mm2/s 的
范圍之內。使用類工作油時,請?jiān)谛吞?hào)末尾注明 G。
Use R & O type, wear-resistant working oil.
Operating oil viscosity is equivalent to ISOVG32,
the use of temperature in the 0 ~ 60 ℃ (350 ~ 15mm2 / s) Fan
Within the working oil viscosity and ISOVG46 considerable, the use of temperature at 6 ~ 65 ℃
將 2 臺變量型葉片泵 (HVP-V ※ 1 系列)組合為一體,并可由 1 臺電動機驅 動。
壓力—排出量標準特性為定量排出型 (A 型)。 從機軸端觀察,
請將工作油的污染度控制在 NAS11 級之內。
請?jiān)?0 ~ 60 ℃的環境溫度下使用。
Set the allowable back pressure of the liquid discharge to 0.03 MPa or less.
Do not use water glycol type working oil.
連接排液管時,請從上方的排液口開始。
請將排液容許背壓設置在 0.03MPa 以下。
外,在儲油罐回路 中安裝 10 ~ 20 μ m 以下的管路過濾器。
請使用 R & O 型、耐磨損型工作油。
1. 根據負荷來調節供應壓力和流量,故可節約動力,油溫上升少,具
有經 濟性。 2. 具有壓力補償機構,故可省略溢流閥、 卸荷閥等。
從機軸端觀察,轉向?yàn)橛肄D(zhuǎn) (順時針方向)。