YUKEN液壓閥，AR22-FR01B-20
換時間可以通過先導流設置
調節旋鈕（減速）。調節轉盤順時針轉動導致先導流量減少、
causes the flow rate to decrease.
While the solenoid operated directional valv
e off ( shown below), the flow rate is set by
the minimum flow adjustment
screw and the actuator operates at the minim
um speed setting. Turning the adjustment screw clockwise causes
the flow rate to increase.
When the solenoid operated directional valve
是必需的入口和出口之間的壓差，以獲得佳的壓力補償。
它根據不同的流速進行設置。有關詳細信息，請
參閱性能曲線。
分鐘。所需的壓力差止回閥壓力下降，流速變化。如
果使用帶單向閥的機型，看看自由流動壓降
特點。自由流動為2升/分鐘（0.53 U.S.GPM）或更低的
小的程度進行調整流量，一定要使用的線路濾波器
10微米或更細，并安裝在接近閥的進口。線路濾波器 is also sh
ifted likewise. The switching time can be set by the pilot flow
adjustment dial (for acceleration). Turning th
e adjustment dial clockwise causes the pilot flow rate to decrease.
When the solenoid operated directional valve
is turned off ( shown below), the flow rate is
shifted from maximum
上海乾拓貿易有限公司
；
直線；
手機；
企業QQ；2880626084
郵箱；@163.com
；劉夢亞
YUKEN液壓閥，AR22-FR01B-20
