YUKEN液壓換向閥，S-DSSG-10-3C11-C1C2-R2-A220-C-A1
是必需的進口和出口之間的小壓力差，以獲得佳的壓力補償。
它根據不同的流速進行設置。有關詳細信息
分鐘。所需的壓力差止回閥壓力下降，流速變化。如果
使用帶單向閥的機型，看看自由流動壓降
特點。自由流動松開鎖緊螺釘和轉盤順時針流量調節轉增加，反時針為減少。
ew and turn the flow adjustment dial clockwise for
increase, and anti-clockwise for decrease.
The dial makes about 4 revolutions from zero t
o full flow and the valve opening is indicated on the revolution indicator.
(Refer to characteristics of "Metred Flow vs.
Dial Position").
After flow adjustments, tighten the locking screw.
Flow adjustment[F?G-01]Loosen the locking screw an
d turn the flow adjustment handle clockwise for increase, and anti-clockwise for decrease.
Open condition is indicated in digital-scale in buil
t-in revolution indicator (Refer to the characteristics of "Metred
Flow vs. Dial Position").
After flow adjustments, tighten the locking screw.
[F?G-02, 03, 06, 10]
[F * G-01]松開鎖緊螺釘和順時針流量調節手柄轉增加，反時針為減少。
打開狀態以數字刻度表示在內置的轉速表（請參閱特色的“Metred
流量與撥盤位置“）。后流調整，擰緊固定螺絲。
[F * G-02，03，06，10]為2升/分鐘（0.53 U.S.GPM）
或更低的小的程度進行調整流量，一定要使用的線路濾波器
10微米或更細，并安裝在接近閥的進口。see free flow pressure drop
characteristics.Free flowLoosen the locking scr
上海乾拓貿易有限公司
；
直線；
手機；
企業QQ；2880626084
郵箱；@163.com
；劉夢亞
YUKEN液壓換向閥，S-DSSG-10-3C11-C1C2-R2-A220-C-A1
