?
西門子SIEMENS變頻器效果圖，216-2BD23-OXBO
概述：
而是通過用于PPI的端口1進行通信。
TOUCHPANEL TP177A。開關設置為RS 422/485。
重量指示器讀數已正確更新。
連接器兩側的開關設置保持ON狀態。
西門子SIMATIC S7-200CPU 226 AC
在Port-0中使用了一個連接器。
在連接器中，來自重量指示器的RS485連接器
/ DC / RLY S.NO.216-2BD23-OXBO
Port-1通過PPI電纜連接到PC。
和連接的MMI電纜。 MMI是SIMATIC
而且，交換機保持在各種位置以檢查通信，
但是，關于MMI有一些問題。
即，PLC不通過端口0與MMI進行通信，
特點：
i.e., The PLC is not communicating with the MMI through port-0,
The Port-1 is connected to PC via PPI cable.
but it is communicating through port-1, which is intended for PPI.
both RS 485 connector from the weight indicator
and the MMI cable the connected .
The MMI is SIMATIC TOUCHPANEL TP177A.The switch setting is RS 422/485.
SIEMENS SIMATIC S7-200CPU 226 AC/DC/RLY S.NO.216-2BD23-OXBO
In the Port-0 a connector is used.In the connector,
Also, the switches are kept in various positions to check the communication,
The weight indicator reading is updated properly.
The switch setting of both sides of the connectors are kept in ON condition.
But,there is some problem regarding the MMI.
西門子SIEMENS變頻器效果圖，216-2BD23-OXBO
