供應美國VICKERS電機泵，威格士電機泵技術參數
上海乾拓貿易有限公司
企業QQ：2880626087
??；
手機；（）
郵箱；@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
System sound is significantly reduced by eliminating the fan and enclosing the motor and pump.
Supporting Literature
which makes it practical to cover the entire assembly (motor and pump) with a compact,
polyethylene sound reduction enclosure. This reduces the sound from the pump as well as the motor,
resulting in a noise level reduction that is unsurpassed in the industry.
A complete line of standard Vickers pumps can be fitted to the Integrated Motor Pump including single fixed vane pumps,
single variable piston pumps, double vane pumps, double piston pumps or mixed vane and piston combinations.
Features & Benefits
Smaller package size because of oil cooled electric motor.
Heat generated by the electric motor is carried away by the hydraulic fluid.
0% reduction in sound compared to conventional power unit systems (approximately 10 dBA).
All external leakage points for both oil leaking out and air leaking in are sealed by static o-rings.
External leakage from dynamic shaft seals has been eliminated.
The specially designed coupling connecting the pump and motor drive shafts is oil lubricated and factory installed by Vickers.
I-3195-S 25V I-3196-S 35V I-3197-S 45V I-3199-S 2520V I-3200-S 2525V I-3212-S 3520V
I-3202-S 3525V I-3203-S 4520V I-3204-S 4525V I-3208-S 4535V I-3209-S
The following literature items can be ordered through your local Vickers Distributor.
PVQ Piston Pumps #GB-C-2132
The Vickers Integrated Motor Pump is a unique combination of a conventional
AC induction motor cooled with system hydraulic oil and a Vickers hydraulic pump,
either fixed vane pump or variable piston type, housed in a special sound reduction enclosure.
This combination provides an exceptionally quiet and small pumping package for
any industrial application requiring up to 125 horsepower (92 kilowatts) of continuous hydraulic power.
The package comes completely assembled, tested, and ready for installation.
This eliminates labor to align and install the coupling.
Only normal filtration practices are required.
Meets the requirements of International Standard IEC 34-5 (1991-01) for
IP57 degrees of protection when installed using a sealed electrical conduit.
The electric motor stator components have UL recognition.
Motor bearings are continuously lubricated by hydraulic fluid.
PVQ Service Literature: Overhaul Manual, I-3230-S PVQ20/32 I-3233-S PVQ40/45 I-3234-S
PVH Piston Pumps #GB-C-2010
PVH Service Literature: Overhaul Manual, M-2210-S PVH57 M-2206-S PVH74 M-2207-S PVH98 M-2208-S PVH131 M-2209-S
V-Series Vane Pumps #560 Vane Pump Service Literature: Overhaul Manual, I-3157-S 20
Circulating the hydraulic oil through the motor, bathing both the rotor and stator,
makes it possible to obtain twice the normal continuous output power from the motor windings.
Physical size reductions of 35% to 50% compared with conventional pumping packages are possible as a result.
Normal operation of the motor is not affected by circulating oil through it, nor is the system’s hydraulic oil damaged.
Heat generated within the electric motor is carried away by the hydraulic fluid and dissipated
by the hydraulic cooling system. A motor fan is not needed,
供應美國VICKERS電機泵，威格士電機泵技術參數
